Chuwi hi10 flash android

Chuwi hi10 flash android

1) download and install intel phoneflashtool

2) download the version of android you need from here:

password is

3) connect your chuwi to your mac with a usbC cable

4) turn your hi10 pro off

5) hold down the volume up and volume down buttons at the same time, keep them pressed

6) press the power on button (keeping the volume buttons down)

7) your chuwie will boot into DMX FASTBOOT MODE and will listen for connections

8) open the phoneflashtool in your mac

Screen Shot 2017-08-05 at 13.53.17.png

9) use the ‘browse’ button to browse to the location of your extracted android download form step 2

10) select either the ‘flash.json or the flash-no-erase-all.json’ files
I selected ‘flash’ as I wanted to clear the device and remove windows, you can also select ‘flash-no-erase-all’ so that windowns wouldnt be touched

11) in the ‘configuration’ dropdown, I selected ‘recover’, you can also select ‘blank’ or ‘update’

12) click ‘start to flash’
wait for the device to reboot a few times and then android will be installed